


WIZ-DTU is a industrial grade dual serial port to Ethernet module. It...

WIZ-IP32 is a industrial grade dual serial port to Ethernet module in a...

WIZ-IP75 is a industrial grade serial to Ethernet module in a Mag Jack...

WIZ-IP55 is a network offloading module that integrates the W5500 chip...
Suppliers
No supplier
The WIZ610MJ is a compact Ethernet module that integrates the W6100 hardwired TCP/IP chip with an embedded PHY and an RJ45 MAG-JACK. It supports both IPv4 and IPv6 Dual Stack, enabling flexible networking for modern embedded systems. By combining all essential Ethernet hardware in one module, it eliminates complex PCB design for the transformer and RJ45...
W5500S2E is a series of industrial grade serial to Ethernet module. It supports TCP server, TCP client, UDP and Modbus modes. The maximum baud rate of the serial port is 1.152Mbps. W5500S2E supports WIZS2E ConfigTool (Configuration Tool for Windows®), web page and AT command for configuring. Substantial Price INCREASED for MCU.
WIZ820io is the compact-sized network module that includes W5200 (TCP/IP & Ethernet MAC & PHY) & MAG-JACK (RJ45 with X’FMR) with other glue logics. Not recommended for new design. WIZ850io is recommended for new design.
802.11b/g/n Wi-Fi Module, Low Power, Compact Size Not recommended for new design End of support
WIZ550io is an auto configurable Ethernet controller that includes a W5500 (TCP/IP hardwired chip and PHY embedded), a transformer and RJ45.
The W5100S-EVB-Pico is a microcontroller evaluation board based on the Raspberry Pi RP2040 microcontroller chip and full hardwired TCP/IP controller W5100S chip. The W5100S-EVB-Pico has the same role as the Raspberry Pi Pico platform and includes W5100S, so the Ethernet function is basically included.
WIZ850io is an compact-sized network module that includes W5500(TCP/IP & Ethernet MAC & PHY) & MAG-JACK (RJ45 with X’FMR) with other glue logics. As it is hardware compatible with WIZ820io, you can easily replace the WIZ820io with WIZ850io just by updating the firmwware.
WIZ550S2E is the serial to Ethernet module using W5500 & Cortex-M0 MCU. WIZ550S2E is the protocol converter that transmits the data sent by serial equipment as TCP/IP data type, and converts back the TCP/IP data received through the network into serial data to transmit back to the equipment.
WIZ811MJ is the network module that includes W5100 (TCP/IP, MAC & PHY) & MAG-JACK (RJ45 with X’FMR) with other glue logics. It can be used as a component and no effort is required to interface W5100 & MAG Jack. The WIZ811MJ is an ideal option for users who want to develop their Internet enabling systems rapidly.
WIZ750SR-100 is the compact sized serial to Ethernet module using W7500, WIZnet iMCU, cortex-M0.WIZ750SR-100 is included External IC+ PHY chip.
WIZ810Sio is the internet offload network module that includes W5100S (TCP/IP hardwired chip, include PHY), MAG-JACK (RJ45 with X’FMR) with other glue logics. It can be used as a component and no effort is required to interface W5100S and Transformer. The WIZ810Sio is an ideal option for users who want to develop their Internet enabling systems rapidly.
By using WIZPoE-P1, which supports both Mode A and Mode B, you can efficiently power external applications within the 7W range without the need for a power cable, not only for Ethernet but also for various external applications
W6100-EVB-Pico2 is a microcontroller evaluation board based on the Raspberry Pi RP2350 and fully hardwired TCP/IP controller W6100 – and basically works the same as Raspberry Pi Pico board but with additional Ethernet via W6100.
The W5300-TOE-Shield is a board that enables high-speed bus communication with the W5300 and ST's Coretex MCU.The W5300-TOE-Shield is a board that can be mounted on a Nucleo board. Individual actions cannot be performed without the Nucleo board, and only the Nucleo-F429 board is currently supported. It also supports various shield boards in the form of...
WIZ125SR is an embedded module based on WIZnet W5100 & ARM Cortex-M3. WIZ125SR supports two serial devices. Not recommended for new design End of support
W7500S2E is a series of industrial grade serial to Ethernet module. It supports TCP server, TCP client and UDP modes. The maximum baud rate of the serial port is 460,800bps. W7500S2E supports WIZS2E ConfigTool (Configuration Tool for Windows®), web page and AT command for configuring.
W5500 Ethernet shield is designed using the WIZnet W5500 chip. Please click the link for the further information about W5500. It supports both 3.3V & 5V. This Ethernet Shield is compatible with Arduino and ARM mbed Platform.
WizFi310 is compliant with 802.11b/g/n. Not recommended for new design End of support
WIZwiki-W7500P is a SoC platform board based on the W7500P chip ( ARM Cortex-M0 that integrates 128KB Flash and hardwired TCP/IP core, MAC & PHY. If you use WIZwiki-W7500P board, you can easily evaluate the W7500P and test its performance and all functions.
WIZ140SR is an embedded module based on WIZnet W5300 & ARM Cortex-M3. It support up to four serial device. Not recommended for new design End of support
Surf 5 is a microcontroller evaluation board based on the W7500 that can be used with our PoE Modules.