No products
Top sellers
WIZ125SR
WIZ125SR is an embedded module based on WIZnet W5100 & ARM Cortex-M3. WIZ125SR supports two serial devices. Not recommended for new design End of support
HKD249.00In StockW7500S2E-S1
W7500S2E is a series of industrial grade serial to Ethernet module. It supports TCP server, TCP client and UDP modes. The maximum baud rate of the serial port is 460,800bps. W7500S2E supports WIZS2E ConfigTool (Configuration Tool for Windows®), web page and AT command for configuring.
HKD95.00In StockW5500 Ethernet Shield
W5500 Ethernet shield is designed using the WIZnet W5500 chip. Please click the link for the further information about W5500. It supports both 3.3V & 5V. This Ethernet Shield is compatible with Arduino and ARM mbed Platform.
HKD179.00In stockW6100-EVB-PICO2
W6100-EVB-Pico2 is a microcontroller evaluation board based on the Raspberry Pi RP2350 and fully hardwired TCP/IP controller W6100 – and basically works the same as Raspberry Pi Pico board but with additional Ethernet via W6100.
HKD88.00In StockWizFi310
WizFi310 is compliant with 802.11b/g/n. Not recommended for new design End of support
HKD116.30In stockWIZwiki-W7500P
WIZwiki-W7500P is a SoC platform board based on the W7500P chip ( ARM Cortex-M0 that integrates 128KB Flash and hardwired TCP/IP core, MAC & PHY. If you use WIZwiki-W7500P board, you can easily evaluate the W7500P and test its performance and all functions.
HKD233.00Out of stockWIZ140SR
WIZ140SR is an embedded module based on WIZnet W5300 & ARM Cortex-M3. It support up to four serial device. Not recommended for new design End of support
HKD335.00Out of stockSurf 5
Surf 5 is a microcontroller evaluation board based on the W7500 that can be used with our PoE Modules.
HKD78.00In StockWizFi360-EVB-Pico
WizFi360-EVB-Pico is based on Raspberry Pi RP2040 and adds Wi-Fi connectivity using WizFi360. It is pin compatible with Raspberry Pi Pico board and can be used for IoT Solution development.
HKD57.00In StockWIZPoE-P1
By using WIZPoE-P1, which supports both Mode A and Mode B, you can efficiently power external applications within the 7W range without the need for a power cable, not only for Ethernet but also for various external applications
HKD50.00In StockWIZnet Ethernet HAT
WIZnet Ethernet HAT (Hardware Attached on Top) is a Raspberry Pi Pico pin-compatible board that utilizes W5100S and supports both 3.3V & 5V. Please refer to this link to find more information about W5100S. Raspberry Pi Pico Pin-Compatible Ethernet (W5100S Hardwired TCP/IP CHIP)
HKD39.00Out of stock
