WIZ105SR is the serial to Ethernet module using W5100 & 8051 MCU. WIZ105SR is the protocol converter that transmits the data sent by serial equipment as TCP/IP data type, and converts back the TCP/IP data received through the network into serial data to transmit back to the equipment. Not recommended for new design End of support Recommended Product:...
W6100-EVB is an evaluation board for W6100 chip based on the 32-bit ARM® Cortex™-M3 microcontroller. It is the easy way to develop internet connection for efficient and small embedded systems using W6100, WIZnet's hardwired TCP/IP embedded Ethernet controller. It has been designed to be hardware pin-compatible with 'Arduino shields' for the 'Arduino UNO...
WIZ830MJ is the network module that includes W5300 (TCP/IP & Ethernet PHY) & MAG-JACK (RJ45 with X’FMR) with other glue logics. It can be used as a component and no effort is required to interface W5300 and MAG Jack. The WIZ830MJ is an ideal option for users who want to develop their Internet enabling systems with high network performance.
WIZ812MJ is the network module that includes W5100 (TCP/IP, MAC & PHY) & MAG-JACK (RJ45 with X’FMR) with other glue logics. It can be used as a component and no effort is required to interface W5100 & MAG Jack. The WIZ812MJ is an ideal option for users who want to develop their Internet enabling systems rapidly.
WIZ105SR-EVB is the evaluation board of WIZ105SR WIZ105SR is the serial to Ethernet module using W5100 & 8051 MCU. WIZ105SR is the protocol converter that transmits the data sent by serial equipment as TCP/IP data type, and converts back the TCP/IP data received through the network into serial data to transmit back to the equipment.
WizFi360-EVB-Mini is a compact development board for experiment, test and verification of WizFi360. WizFi360-EVB-Mini is the same form factor as the NodeMCU V2. WizFi360 is a low cost and low-power consumption industrial-grade WiFi module. It is compatible with IEEE802.11 b/g/n standard and supports SoftAP, Station and SoftAP+Station modes. The serial...
WizFi360io-C cable connector type io interface board. The operating voltage of the WizFi360io-C and the UART voltage are 5V. WizFi360io-C can connect the UART interface to the connector. The part name of the connector mounted on WizFi360io-C is “SMW200-06”. The cable connector that can be connected to “SMW200-06” is “SMH200-06”.
WizFi360io-H is a pin header type io interface board. The form factor of WizFi360io is an Xbee interface module. 2.00mm pin header is used, similar to the Xbee pin layout. But it is not exactly compatible.