No products
W6100 Ethernet Shield
W6100 Ethernet Shield is based on W6100. For more information about W6100, please visit W6100 Datasheet. This Ethernet Shield can be used on boards with an Arduino Pin Header Form factor.
HKD210.60In stockW5500 Ethernet Shield
W5500 Ethernet shield is designed using the WIZnet W5500 chip. Please click the link for the further information about W5500. It supports both 3.3V & 5V. This Ethernet Shield is compatible with Arduino and ARM mbed Platform.
HKD179.00In stockWIZnet Pico PoE
It combines with the W5500, W5100S, and W6100 Io Module to provide Ethernet as well as a separate power supply. It can supply up to 8W Raspberry Pi Pico Mountable Ethernet W5100S, W5500, W6100 IO Module Mountable
HKD228.00Out of stockW5100S EthernetShield
W5100S Ethernet shield is designed using the WIZnet W5100S chip.
HKD210.60Out of stockW5300-TOE-Shield
The W5300-TOE-Shield is a board that enables high-speed bus communication with the W5300 and ST's Coretex MCU.The W5300-TOE-Shield is a board that can be mounted on a Nucleo board. Individual actions cannot be performed without the Nucleo board, and only the Nucleo-F429 board is currently supported. It also supports various shield boards in the form of...
HKD156.00In StockWIZnet Ethernet HAT
WIZnet Ethernet HAT (Hardware Attached on Top) is a Raspberry Pi Pico pin-compatible board that utilizes W5100S and supports both 3.3V & 5V. Please refer to this link to find more information about W5100S. Raspberry Pi Pico Pin-Compatible Ethernet (W5100S Hardwired TCP/IP CHIP)
HKD39.00In StockWIZwiki-W7500P
WIZwiki-W7500P is a SoC platform board based on the W7500P chip ( ARM Cortex-M0 that integrates 128KB Flash and hardwired TCP/IP core, MAC & PHY. If you use WIZwiki-W7500P board, you can easily evaluate the W7500P and test its performance and all functions.
HKD233.00Out of stock
W6100-io
W6100-io is a compact size network module that includes a W6100 (TCP/IP hardwired chip and PHY embedded).It can be used as a component and no effort is required to interface W6100. The W6100-io an ideal option for users who want to develop their Internet enabling systems rapidly. W6100-io is hardware compatible with W5100s-io and W5500-io.
HKD51.50Out of stockW5500-io
W5500-io is a compact size network module that includes a W5500 (TCP/IP hardwired chip and PHY embedded).It can be used as a component and no effort is required to interface W5500. The W5500-io an ideal option for users who want to develop their Internet enabling systems rapidly. W5500-io is hardware compatible with W5100s-io and W6100-io.
HKD51.50Out of stockW5100S-io
W5100S-io is a compact size network module that includes a W5100S (TCP/IP hardwired chip and PHY embedded).It can be used as a component and no effort is required to interface W5100S. The W5100S-io an ideal option for users who want to develop their Internet enabling systems rapidly. W5100S-io is hardware compatible with W5500-io and W6100-io.
HKD51.50Out of stockW6100-EVB-Pico
W6100-EVB-Pico is a microcontroller evaluation board based on the Raspberry Pi RP2040 and fully hardwired TCP/IP controller W6100 – and basically works the same as Raspberry Pi Pico board but with additional Ethernet via W6100.
HKD78.00Out of stockW7500S2E-D1
W7500S2E is a series of industrial grade serial to Ethernet module. It supports TCP server, TCP client and UDP modes. The maximum baud rate of the serial port is 460,800bps. W7500S2E supports WIZS2E ConfigTool (Configuration Tool for Windows®), web page and AT command for configuring. Price increase due to material costs.
HKD102.00In StockWIZnet Pico PoE
It combines with the W5500, W5100S, and W6100 Io Module to provide Ethernet as well as a separate power supply. It can supply up to 8W Raspberry Pi Pico Mountable Ethernet W5100S, W5500, W6100 IO Module Mountable
HKD228.00Out of stock
HRW5500RE
Single Port RJ45 Connector with Intergrated Magnetics and LED for 10/100Base-T NIC Application
HKD6.24In StockW7500S2E-R1
W7500S2E is a series of industrial grade serial to Ethernet module. It supports TCP server, TCP client and UDP modes. The maximum baud rate of the serial port is 460,800bps. W7500S2E supports WIZS2E ConfigTool (Configuration Tool for Windows®), web page and AT command for configuring. Price increase due to material costs.
HKD90.00In StockW7500P
The IOP (Internet Offload Processor) W7500P is the one-chip solution which integrates an ARM Cortex-M0, 128KB Flash and hardwired TCP/IP core & PHY for various embedded application platform especially requiring ‘Internet of things’.
HKD34.40In StockNM7010B+
NM7010B+ is the network module that includes W3150A+ (TCP/IP hardwired chip), Ethernet PHY (RTL8201CP) & MAG-JACK (RJ45 with X’FMR) with other glue logics. It can be used as a component and no effort is required to interface W3150A+ and PHY chip. The NM7010B+ is an ideal option for users who want to develop their Internet enabling systems rapidly. EOL...
HKD163.00Out of stockWIZ550SR
WIZ550SR is Serial to Ethernet module, It's mounted TCP/IP chip W5500 of WIZnet and Cortex-M3-based STM32F103RCT6 of STmicro. WIZ550SR does not contain RJ45 because very small size type. WIZ550SR provides the user Interface 2.00mm Pitch Pin header.
HKD171.60Out of stockW5100S
Hardwired TCP/IP w/ 802.3 Ethernet MAC and PHY, 4-sockets, Fast SPI/BUS
HKD14.90Product available with different optionsW6100
IPv4/IPv6,Hardwired TCP/IP w/ 802.3 Ethernet MAC and PHY, 8-sockets, Fast SPI/BUS
HKD24.10In StockW5500S2E-Z1
W5500S2E is a series of industrial grade serial to Ethernet module. It supports TCP server, TCP client, UDP and Modbus modes. The maximum baud rate of the serial port is 1.152Mbps. W5500S2E supports WIZS2E ConfigTool (Configuration Tool for Windows®), web page and AT command for configuring. Substantial Price INCREASED for MCU.
HKD140.00In Stock
W6100 Ethernet Shield
W6100 Ethernet Shield is based on W6100. For more information about W6100, please visit W6100 Datasheet. This Ethernet Shield can be used on boards with an Arduino Pin Header Form factor.
HKD210.60In stockW5500 Ethernet Shield
W5500 Ethernet shield is designed using the WIZnet W5500 chip. Please click the link for the further information about W5500. It supports both 3.3V & 5V. This Ethernet Shield is compatible with Arduino and ARM mbed Platform.
HKD179.00In stockWIZnet Pico PoE
It combines with the W5500, W5100S, and W6100 Io Module to provide Ethernet as well as a separate power supply. It can supply up to 8W Raspberry Pi Pico Mountable Ethernet W5100S, W5500, W6100 IO Module Mountable
HKD228.00Out of stockW5100S EthernetShield
W5100S Ethernet shield is designed using the WIZnet W5100S chip.
HKD210.60Out of stockW5300-TOE-Shield
The W5300-TOE-Shield is a board that enables high-speed bus communication with the W5300 and ST's Coretex MCU.The W5300-TOE-Shield is a board that can be mounted on a Nucleo board. Individual actions cannot be performed without the Nucleo board, and only the Nucleo-F429 board is currently supported. It also supports various shield boards in the form of...
HKD156.00In StockWIZnet Ethernet HAT
WIZnet Ethernet HAT (Hardware Attached on Top) is a Raspberry Pi Pico pin-compatible board that utilizes W5100S and supports both 3.3V & 5V. Please refer to this link to find more information about W5100S. Raspberry Pi Pico Pin-Compatible Ethernet (W5100S Hardwired TCP/IP CHIP)
HKD39.00In StockWIZwiki-W7500P
WIZwiki-W7500P is a SoC platform board based on the W7500P chip ( ARM Cortex-M0 that integrates 128KB Flash and hardwired TCP/IP core, MAC & PHY. If you use WIZwiki-W7500P board, you can easily evaluate the W7500P and test its performance and all functions.
HKD233.00Out of stock