No products
- WizFi250 : Single band 2.4GHz IEEE802.11b/g/n WiFi module
- WizFi210, WizFi220...
- WizFi250 : Single band 2.4GHz IEEE802.11b/g/n WiFi module
- WizFi210, WizFi220 : Single bans 2.4GH IEEE802.1b WiFi Module
Wi-Fi Module There are 8 products.
WizFi360-EVB-Pico
WizFi360-EVB-Pico is based on Raspberry Pi RP2040 and adds Wi-Fi connectivity using WizFi360. It is pin compatible with Raspberry Pi Pico board and can be used for IoT Solution development.
HKD57.00In StockWizFi360io-H
WizFi360io-H is a pin header type io interface board. The form factor of WizFi360io is an Xbee interface module. 2.00mm pin header is used, similar to the Xbee pin layout. But it is not exactly compatible.
HKD48.36In StockWizFi360io-C
WizFi360io-C cable connector type io interface board. The operating voltage of the WizFi360io-C and the UART voltage are 5V. WizFi360io-C can connect the UART interface to the connector. The part name of the connector mounted on WizFi360io-C is “SMW200-06”. The cable connector that can be connected to “SMW200-06” is “SMH200-06”.
HKD48.36In StockWizFi630S
WizFi630S is a gateway module that integrates 1T1R 802.11 Wi-Fi, a 580MHz CPU, Ethernet PHY, USB2.0 host, SD-XC, I2S, I2C and more GPIOs. WizFi630S enables a device with serial interface to connect to LAN or WLAN for remote control, measuring, and administration. WizFi630S can also work as an IP router because of its internal embedded switch.
HKD234.00Out of stockWizFi360
Designed for various IoT applications, mobile and wearable devices, WizFi360 is fast & simple plug-and-play device that allows to easily add wireless capabilities. The WizFi360 wi-fi module is a cost-effective WiFi module that supports both TCP/IP and microcontrollers.
HKD25.70In stockWizFi310
WizFi310 is compliant with 802.11b/g/n. Not recommended for new design End of support
HKD116.30In stockWizFi250
802.11b/g/n Wi-Fi Module, Low Power, Compact Size Not recommended for new design End of support
HKD154.00In stock
