W6100

Condition: New product

IPv4/IPv6,Hardwired TCP/IP w/ 802.3 Ethernet MAC and PHY, 8-sockets, Fast SPI/BUS

More details

In stock

Volume discounts

Quantity	Price	You Save
2500	HKD21.36	Up to HKD6,850.00
2600	HKD21.36	Up to HKD7,124.00

Data sheet

Embedded Core	TCP/IPv4/IPv6, MAC & PHY
Host Interface	8bit BUS, SPI
TX/RX Buffer	32KB
Number of Hardware Socket	8
Network Performance	Max 25Mbps
Operation Temp (℃)	-40 ~ 85
Package Type	48LQFP / QFN (7x7)

More info

W6100 is a hardwired Internet controller chip supporting IPv4/IPv6 dual stack by adding IPv6 functions on the basis of WIZnet’s patented hardwired TCP/IP core technology. W6100 supports TCP/IP protocols such as TCP, UDP, IPv6, IPv4, ICMPv6, ICMPv4, IGMP, ARP and PPPoE. W6100 also includes 10Base-T / 10Base-Te / 100Base-TX Ethernet PHY and Ethernet MAC Controller which makes it suitable for embedded internet-enabled devices.

W6100 has 8 independent hardwired SOCKETs and supports various SOCKET-less commands, which are for IPv6 auto-configuration, monitoring, and managing the network via ARP, PINGv4, and PINGv6.

W6100 supports two kinds of HOST interfaces; SPI and parallel system BUS. It has 32KB internal memory for sending and receiving data. Designed for low power and low heat, W6100 provides WOL (Wake On LAN), Ethernet PHY power down mode and etc.

W6100 has two package types, 48 LQFP and 48 QFN lead-free. Both versions are PIN-2-PIN compatible with W5100S.

Features

Support Hardwired TCP/IP Protocols : TCP, UDP, IPv6, IPv4, ICMPv6, ICMPv4, IGMP, MLDv1, ARP, PPPoE
Support IPv4/IPv6 Dual Stack
Support 8 independent SOCKETs simultaneously with 32KB Memory
Support SOCKET-less Command: ARP, PING, ICMPv6(PING, ARP,DAD,NA,RS) Command for IPv6 Auto-configuration& Network Monitoring
Support Ethernet Power Down Mode & System Clock Switching for power save
Support Wake on LAN over UDP
Support Serial & Parallel Host Interface: High Speed SPI(MODE 0/3), System Bus with 2 Address signal & 8bit Data
Internal 16Kbytes Memory for TX/ RX Buffers
10BaseT / 10BaseTe / 100BaseTX Ethernet PHY Integrated
Support Auto Negotiation (Full and half duplex, 10 and 100-based )
Support Auto-MDIX only on Auto-Negotiation Mode
Not support IP Fragmentation
3V operation with 5V I/O signal tolerance
Network Indicator LEDs (Full/Half Duplex, Link, 10/100 Speed, Active)
48 Pin LQFP & QFN Lead-Free Package (7x7mm, 0.5mm pitch)
W5100S PIN-2-PIN Compatible