Cart 0 Product Products (empty)
No products
To be determined Shipping
HKD0.00 Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping To be determined
Total
WIZ550S2E-232
New product
Serial-to-Ethernet Module WIZ550S2E + Interface board for RS232
This product is no longer in stock
Volume discounts
| Quantity | Price | You Save |
|---|---|---|
| 40 | HKD195.00 | Up to HKD1,240.00 |
More info
Serial-to-Ethernet Module WIZ550S2E + Interface board for RS232
WIZ550S2E
Features
- Serial to Ethernet Module based on W5500 & Cortex-M0
- RJ-45 mounted, Pin-header type module
- Serial signals : TXD, RXD, RTS, CTS, GND
- Support the configuration method of AT command & Configuration tool program
- Configuration tool program operates on Windows, Linux & MAC OS
- Support data communication using AT command : able to send data without re-configuring and re-boot of the module when changing the destination IP
- Support the interface board for RS-232 and RS422/485
- 10/100Mbps Ethernet & Max.230kbps serial speed
- Support WIZ VSP (Virtual Serial Port) program
Hardware Specification
- Dimension (mm) : 55(L) x 30 (W) x 23.49 (H)
- Input Voltage : 3.3V
- Max. Power Consumption : 179mA @ RS422 mode
- Operation Temperature : -40~ 85℃
- RoHS, SVHC Compliant
Pin Description
| Ref No. | Pin No. | Symbol | Type | Description |
|---|---|---|---|---|
| J1 | 1 | 3V3D | P | Supply DC+3.3V |
| 2 | RSVD1 | I/O | Reserved I/O | |
| 3 | RSVD2 | I/O | Reserved I/O | |
| 4 | nSYSRST | I | System reset input. Active Low. | |
| 5 | nFACRST | I | Factory reset. Active Low > 5sec. Changing the settings of the module to the default value | |
| 6 | nHWTRIG | I | Hardware Trigger input Active Low. | |
| 7 | GND | P | Power Ground | |
| 8 | GND | P | Power Ground |
| Ref No. | Pin No. | Symbol | Type | Description |
|---|---|---|---|---|
| J2 | 1 | GND | P | Power Ground |
| 2 | NC | - | No connection | |
| 3 | STATUS1 | O | Output for LED Display | |
| 4 | STATUS2 | O | Output for LED Display | |
| 5 | nCTS | I | Clear To Send input for UART | |
| 6 | nRTS | O | Request To Send output for UART. This pin also serves as the RS485 control. | |
| 7 | RXD | I | Receiver input for UART | |
| 8 | TXD | O | Transmitter output for UART | |
| 9 | 3V3D | P | Supply DC+3.3V |
WIZ550S2E-232 Interface board
- Line Driver SP3232EBEY
- System Reset Switch
- Factory Reset Switch
- Hardware-Trigger Mode Switch
- Status LEDs
- DC-Jack (for +5V Input Power)
Reviews
No customer reviews for the moment.
Accessories
