W5100S-EVB

• 32bit ARM Cortex-M3 based evaluation board for W5100S chip
• Hardware pin-compatible with Arduino Uno Rev.3
• Supported 2 Push button switch (SW), 1 x RGB LED
• Supported 1-Port Ethernet Connector / USB-micro Type B connector
• Supported ISP & SWD Interface
• Provides various application code – Loopback, DHCP, DNS.

• MCU: STM32F103VCT6 Cortex-M3 (Running at up to maximum 72MHz, 256 or 512KB Flash, 64KB SRAM)
• Ethernet: W5100S (WIZnet Hardwired TCP/IP)
• Power: 5V DC Power
• Expansion I/O: 80 GPIOs (Include analog Peripheral using 12bit ADC)
• RJ-45: 1-channel 10/100 Base-TX RJ-45 with Transformer (57-00013QL11-1 / UDE)
• USB: USB Micro-B Type (On-board USB-to-UART IC, USB BUS Power / CP2104) – Use to debug
• On-board User I/F: 2xPush button switch, 1xRGB LED
• Dimension (mm): 90 (L) x 80 (W) x 15(H)

More