W5500S2E-Z1

W5500S2E-Z1

New product

W5500S2E-Z1 is an industrial-grade serial-Port Ethernet module, supporting TCP Server, TCP client and UDP three kinds of operation mode, serial port baud rate of up to 1.152Mbps, and support computer configuration software, also it can be easily configured through Web pages by AT commands.

More details

HKD107.60

Add to wishlist

Volume discounts

QuantityDiscountYou Save
120 HKD103.00 Up to HKD12,360.00
1008 HKD83.50 Up to HKD84,168.00

More info

Module integrates with full hardware TCP/IP protocol stack Ethernet chip W5500, and network communication is fast, stable and robust. The user just need to refer to the reference schematics and the user manual, can complete the hardware circuit design quickly, reduces the development difficulty and saves the development time.

Features

W5500S2E-Z1 module has the following key features:

  • Baud rate can be set between 1.2kbps~1.152Mbps
  • 10/100M auto speed Ethernet interface
  • Support TCP Server、TCP Client anad UDP three difference operation mode
  • Flexible serial data packet settings to meet the various requirements
  • Smart network cable detection and keep alive function to provide real-time communication
  • Support DHCP to automatically obtain IP addresses
  • Support DNS function to meet users' needs for communication through domain name
  • Support NetBIOS functionality for user-friendly naming of devices
  • Support TCP authorisation function, improve communication security
  • Support for serial port AT command configuration
  • Built-in Web server for remote device management
  • Support the configuration tool for Windows
  • Support for local and remote firmware upgrades

Hardware Specification

  • 32 bit ARM MCU
  • LAN
    • 10/100Mbps Ethernet
  • Serial port
    • 3V TTL x1:TXD、RXD、GND
  • Serial Communication parameters
    • Baud rate: 2kbps to 1.152Mbps
    • Data bits: 7, 8
    • Stop bit: 5, 1, 1.5, 2
    • Checksum: None, Even, Odd
    • Flow control: None, CTS/RTS
  • Software
    • Tool: WIZS2E ConfigTool for Windows
    • Configuration methods: ConfigTool,Web browser,Serial AT command
  • Power
    • Input power: 5V DC
  • Dimensions
    • Size (L × W × H): 44.5x31.75x15.75(mm)
  • Operating temperature
    • Industrial Grade: -40 ~ +85 ℃
  • Storage temperature
    • -40 ~ +85 ℃, 5 ~ 95% RH

Configuration method

W5500S2E-Z1 provides three common parameter configurations for users to choose from:

  • WIZS2E ConfigTool for Windows software, users can install the software on the Windows operating system computer configuration;
  • Web browser configuration, facilitate users to configure locally or remotely through a Web browser;

AT command configuration, users can integrate W5500S2E-S1 into their own embedded products on the motherboard, through the AT command for parameter configuration, or directly through the serial tool to use the AT command configuration.

Physical dimensions

Users who need to integrate the W5500S2E-Z1 module on their motherboard can refer to the appearance mechanical dimensions provided by FIG. 1‑1. The length, width and height of the product, the distance between the two parts of the needle and the position of the four mounting holes are specified in the figure. In addition, the pin header is spaced by 2.54mm standard pins.


Figure 1‑1 W5500S2E-Z1 module physical dimension diagram - top view

Figure 1‑2 W5500S2E-Z1 module physical dimension diagram - side view

Figure 2‑1 W5500S2E-Z1 module outlook

Figure 2‑2 W5500S2E-Z1 Module Pin alignments

Product Site

Reviews

No customer reviews for the moment.

Write a review

W5500S2E-Z1

W5500S2E-Z1

W5500S2E-Z1 is an industrial-grade serial-Port Ethernet module, supporting TCP Server, TCP client and UDP three kinds of operation mode, serial port baud rate of up to 1.152Mbps, and support computer configuration software, also it can be easily configured through Web pages by AT commands.