New WIZnet Pico PoE View larger

WIZnet Pico PoE

New product

It combines with the W5500, W5100S, and W6100 Io Module to provide Ethernet as well as a separate power supply. It can supply up to 8W

  • Raspberry Pi Pico Mountable
  • Ethernet W5100S, W5500, W6100 IO Module Mountable

More details

This product is no longer in stock

HKD228.00

Add to wishlist

More info

Features

PoE

  • IEEE802.3af compliant
  • Mode A(Endspan), Mode B(Midspan)
  • Wide input voltage range 37Vdc ~ 57Vdc
  • Circuit Protection (OV,OC)
  • High DC/DC conversion efficiency
  • Isolation level 2kVrms
  • Enhanced surge protection
  • Internal build in 2 channel bridge rectifiers

PoE Electrical Specifications

NoValueSpecification
1Input Voltage37 ~ 57V
2Output Voltage5V (1.6A)
3.3V (1A LDO)
3Power8W
4Switching Frequency400kHz fixed
5Isolation2kVrms
6Operating Temperature-20 ~ 85℃

WIZnet IO Module

  • W5100S-IO
    • Supports Hardwired Internet Protocols: TCP, UDP, WOL over UDP, ICMP, IGMPv1/v2, IPv4, ARP, PPPoE
    • Supports 4 Independent Hardware SOCKETs simultaneously
    • Internal 16 Kbytes Memory for TX/ RX Buffers
    • SPI Interface
  • W5500-IO
    • Supports Hardwired Internet Protocols: TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
    • Supports 8 Independent Hardware SOCKETs simultaneously
    • Internal 32 Kbytes Memory for TX/ RX Buffers
    • Supports High Speed Serial Peripheral Interface(SPI MODE 0, 3)
  • W6100-IO
    • Supports Hardwired Internet Protocols: TCP, UDP, IPv6, IPv4, ICMPv6, ICMPv4, IGMP, MLDv1, ARP, PPPoE
    • Supports 8 independent SOCKETs simultaneously with 32KB memory
    • Internal 16 Kbytes Memory for TX/ RX Buffers
    • SPI Interface

Raspberry Pi Pico

  • RP2040 microcontroller with 2MByte Flash
    • Dual-core cortex M0+ at up to 133MHz
    • 264kByte multi-bank high performance SRAM
    • External Quad-SPI Flash with eXecute In Place (XIP)
    • High performance full-crossbar bus fabric
    • 30 multi-function General Purpose IO (4 can be used for ADC)
      • 1.8-3.3V IO Voltage (NOTE. Pico IO voltage is fixed at 3.3V)
    • 12-bit 500ksps Analogue to Digital Converter (ADC)
    • Various digital peripherals
      • 2 × UART, 2 × I2C, 2 × SPI, 16 × PWM channels
      • 1 × Timer with 4 alarms, 1 × Real Time Counter
    • 2 × Programmable IO (PIO) blocks, 8 state machines total
    • Flexible, user-programmable high-speed IO
    • Can emulate interfaces such as SD Card and VGA

Other Functions

  • 3-pin ARM Serial Wire Debug (SWD) port
  • 10 / 100 Ethernet PHY embedded
  • Supports Auto Negotiation
    • Full / Half Duplex
    • 10 / 100 Based
  • Built-in RJ45(BR1-ZZ-0049)
  • Built-in LDO (IL1117-3.3)

WIZnet Pico PoE

Reviews

No customer reviews for the moment.

Write a review

WIZnet Pico PoE

WIZnet Pico PoE

It combines with the W5500, W5100S, and W6100 Io Module to provide Ethernet as well as a separate power supply. It can supply up to 8W

  • Raspberry Pi Pico Mountable
  • Ethernet W5100S, W5500, W6100 IO Module Mountable