W7500S2E-Z1

W7500S2E-Z1

New product

W7500S2E is a series of industrial grade serial to Ethernet module. It supports TCP server, TCP client and UDP modes. The maximum baud rate of the serial port is 460,800bps. W7500S2E supports WIZS2E ConfigTool (Configuration Tool for Windows®), web page and AT command for configuring.

Price increase due to material costs.

More details

This product is no longer in stock

HKD95.00

Add to wishlist

Volume discounts

QuantityPriceYou Save
24 HKD87.00 Up to HKD192.00

More info

Module is based on iMCU W7500 which integrates CortexM0 with full hardware TCP/IP protocol stack Ethernet engine, and network communication is fast, stable and robust. The user just need to refer to the reference schematics and the user manual, can complete the hardware circuit design quickly, reduces the development difficulty and saves the development time.

Features

  • Support dual mode: “Data pass-through” and “AT data transfer”
  • Support TCP server, TCP client and UDP operating modes
  • Support RS-485 enable pin of an external RS-485 transceiver
  • Flexible data packet condition for the serial interface
  • Support DHCP to configure IP address and other network configuration parameters
  • Support DNS for remote server domain name lookup
  • Support NetBIOS for easy access of web configuration page
  • Support three configuration method: serial AT command, PC software and web page
  • Support local firmware upgrade by PC software
  • Support “Keep-Alive” to guarantee TCP connection

Specification

  • Dimension: 44.45×31.75×15.75 (mm)
  • Network socket type: Ethernet transformer
  • Voltage input DC 5.0V
  • Industrial grade: -40℃ ~ +85℃
  • 10/100Mbps Ethernet interface
  • Serial interface: 3.3V TTL:TXD, RXD, CTS, RTS, GND
    • Baud Rate: From 300bps to 460,800bps with 16 common values
    • Data Bit: 7, 8
    • Stop Bit: 1, 2
    • Parity: None, Even, Odd
    • Flow Control: None, CTS/RTS
  • Storage environment: -40 ~ +85 ℃, 5 ~ 95% RH

Configuration methods

W7500S2E provides three types configuration methods for user to operate with the module.

  • WIZS2E ConfigTool is a PC software configuration tool. It can be installed and run in Windows® PC
  • Web page configuration allows user locally or remotely to configure the module through web browser.
  • AT command configuration support sending serial commands from the main board of the embedded device or from the serial terminal to configure the parameters of WIZS2E modules.

More

Reviews

No customer reviews for the moment.

Write a review

W7500S2E-Z1

W7500S2E-Z1

W7500S2E is a series of industrial grade serial to Ethernet module. It supports TCP server, TCP client and UDP modes. The maximum baud rate of the serial port is 460,800bps. W7500S2E supports WIZS2E ConfigTool (Configuration Tool for Windows®), web page and AT command for configuring.

Price increase due to material costs.

Accessories